|
|
|
|
#1
26th September 2014, 08:26 PM
|
||||
|
||||
Rear light radius fail
Will these fail the radius check? They are from caterham and are used on most of their builds and the Caterham IVA check does not mention them as needing trim. But to my mind a tester could fail it? They are E and F marked. Your thoughts?
 Very simliar light on CBS says IVA OK? http://www.carbuildersolutions.com/u...g-120mm-x-80mm Last edited by CTWV50 : 26th September 2014 at 08:29 PM. 
|
|
#2
26th September 2014, 09:16 PM
|
||||
|
||||
|
Mine are similar. I trimmed them as I thought a picky IVA man could fail them.
If in doubt stick some trim on.
|
|
#4
26th September 2014, 09:30 PM
|
|||
|
|||
|
I used the same and superglued some rubber trim around. The same iva man found me a spanner to tighten something.
David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#5
29th September 2014, 11:16 AM
|
||||
|
||||
|
Cheers, going to rubber trim it. Pita though.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
