![]() |
|
#1
|
|||
|
|||
![]() ![]() |
#2
|
||||
|
||||
![]() welcome to the forum Martin, ( even tho you,ve been lurking for a while), keep us updated with your Roadster build, looks like there will be another Roadster in your area soon too,
![]() best regards for your current & future builds. andy ![]() |
#3
|
|||
|
|||
![]() could any one help me I am trying to set up u1/u2 with tr1/tr2 is there an easy way to make sure they are vertical any help would be appreciated
|
#4
|
||||
|
||||
![]() Hi Martin,
the U1 U2 need to be 361mm apart on BR7 then lean out to the underside of TR1 & TR2, what prob have you encountered? i,ll help if i can. cheers andy ![]() |
#5
|
||||
|
||||
![]() not sure if my above post explained clearly what i meant (sorry, its been a long day & i,m tired )
![]() basically the "feet" of U1 & U2 sit on BR7 361mm apart, helps if a center line is drawn on the table/bottom rails etc, they then lean outwards & position on the underside of the TR1 or TR2 rail, there is a slight point that is visible on the outside of the TR rail due to the angle of the TR rail as its angled inwards to the front frame. hope this helps. cheers andy |
#6
|
|||
|
|||
![]() Quote:
|
![]() |
Thread Tools | |
Display Modes | |
|
|