Immobiliser wiring

[garyout]

Afternoon all



So I am in the middle of sorting loom out I now have a big pile of wiring that I wont be using now lights etc as I will be making my own when I suddenly thought b***ox I have cut wiring for immobiliser

Now I have the wiring coming from key reader to the magic box but I am left with,

Black/white
Black/blue
Red/white
Blue/red
Blue/black

I haven't a clue were they go its a 99-2000 hope some one out there can help

Gary

[bentovey]

Hi, I’m just working my way through my loom now. I haven’t got to the immobiliser yet but I made a real hash of the hazard light switch. What I did was buy that section of the loom again from a breakers with all the connectors in place swap over all the relays and switches and start again. The replacement section was about £20 inc postage.
Hope this is of some use
Ben

[garyout]

Evening Ben


Didn't really want to go with getting a loom but I guess if no on has one to hand to check wires then hay ho, Plus I really want to go after market ecu later on so no immobiliser. new ecu might have to come sooner rather than later


Gary

[twinturbo]

I will be going with a speeduino ecu if i ever get past IVA on the carbed CVH engine

[garyout]

Afternoon all


That was my plan go megasquirt or alike after test but as funds are a bit short I was just going to get it running with standard ecu but cocked up cutting out wiring.

Has any one used a racing electronics ecu?? quite cheap on fleabay but can not find a review on them

Gary

[twinturbo]

The MadCod?

It's a customised speeduino board. I had one for a few months but other projects meant it was not going to get used and I sold it to fund a bit of my Modular Synth...

It seemed well made and the guy behind them is very helpful.

My only issue was that I loaded a new firmware not realising that their firmware is a tailored version of the speeduino code.

I have spent the last 6 months soldering projects for my synth, so building a Speeduino will be childs play now.