![]() |
|
#1
|
|||
|
|||
![]() hey guys
why cant i find any 33.7mm x 2.6mm wall tube anywhere cheers Andy |
#2
|
||||
|
||||
![]() I guess it just depends where you live
![]() My local stockist keeps it on the shelf in handy 2m lengths ![]() If you get really stuck I could post you some up. ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#3
|
|||
|
|||
![]() Quote:
how much do i actually need anyway? if you bought a 2m lenth you must have some spare you should sell the off cuts off lol cheers Andy |
#4
|
||||
|
||||
![]() I was sneakier than that !! .......... I got several 1.7m lengths from the off-cut bin
![]() ![]() If memory serves me right, you'll need about 18 bush tubes ( 16 for the wishbones + 2 for the rear camber adjusters ) Each 35mm long, 1m would be plenty. I believe there is a spare set of tubes in the workshop wich have been machined to the correct length ![]() Was going to stick them on ebay but never got round to doing it ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#5
|
||||
|
||||
![]() I can sell you the right amount all ready cut and bored to size if you want.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#6
|
|||
|
|||
![]() Howmuch would you sell them for?
|
#7
|
||||
|
||||
![]() HI
The tube is the same size as 1"1/4 gas pipe. So you get it from your local pumbers merchant if you cant find it in steel supplier. |
![]() |
Thread Tools | |
Display Modes | |
|
|