|
#1
|
||||
|
||||
Roll Bar too
I could manage to get my roll bar locally made, but I made a little mistake in the measurements of the main hoop: I told them 416mm high from the lower face (to be welded on RB1) to the top, instead of from the lower face to the middle line as in the book. Which means that the main hoop is about 25mm too short. I'm not tall (1.73m, sorry don't know how it is in feet ), so I think it is not a big problem. But do you guys see any problem with a "too small" roll bar ?
Thank you.
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://cafrazx550.blogspot.com/ |
#2
|
||||
|
||||
I dont think 1 inch is gonna make too much of a difference Sylvain .....just dont grow any more and get a skinhead
|
#3
|
||||
|
||||
I think you're right Kev'
I lost all hopes of being taller years ago At my age, hair fall off without any external help Thanks mate ! Pictures of the roll bar soon online.
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://cafrazx550.blogspot.com/ |
#4
|
||||
|
||||
Raise the mounts 25mm if your worried.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#5
|
|||
|
|||
why not just weld in two same size bits of tube to jack it up 25mm?
|
#6
|
||||
|
||||
You are right, I'm not going to do it now, but I will keep this as an option for later if I need.
Thank you. Quote:
Thanks anyway, could have been a solution
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://cafrazx550.blogspot.com/ |
Thread Tools | |
Display Modes | |
|
|