What on earth have I done wrong?

[dean211277]

I am in the early stages of tacking my tmxr chassis together.
I have really took my time constantly measuring in every direction making sure they are spot on as per the book.

Now I have placed the bottom transmission sections, tt 3 and tt 4, as it is the talon tmxr chassis these are different to the book and in two pieces.

When butted up to br 11 the front should then neatly meet up with br 10.

However it looks like I'm out by nearly 10mm!!
I have checked and rechecked the distance between br 10 and br 11 and it is spot on.

Any idea what I'm missing or have done wrong?

[IMG][/IMG]
[IMG][/IMG][IMG][/IMG]

[vmax1974]

Have you checked that tt3 has been cut correctly

[dean211277]

As it's a talon flat pack kit I assume it is the correct length as everything else is spot on, also I don't have the dimensions as they differ to the book spec.

[The V8 Files]

Whats on the opposite side of the chassis?

[dean211277]

The opposite side is the same aswell.
tt2 and tt2a also look the same when lined up.

[SteveH1]

This is probably stupid and in sure u have tried it
But does it fit if you put the end of tt3 in first with the 90 degree angle does it fit