|
|
|
|
#2
15th April 2009, 10:21 AM
|
||||
|
||||
Assuming you are going the fuel injection route you have two options.
Save the donors pump & sender unit. You will then need to fabricate your tank to suit the pump & sender assembly. You will also need to give some thought into building a swirl chamber within your tank. Use an aftermarket, externaly mounted high pressure pump, filters & external swirl pot. This being the case you will only need 1 flow & 1 return union on your tank. + any mod needed to fit a sender unit if you want to fit one. 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
