|
#1
|
|||
|
|||
Getting started
Hello everyone - first post (on anything, anywhere, ever !!)
Bought a Sierra at the weekend, not really ready for it yet , bt couldn't say no as only 4 miles away, done 95000 one owner since '94 with every tax disc and MOT. Bit worried though, runs fine, but lots of oil on outside of engine and didn't realise I was getting electronic spark control, does this transplant ok ? It's an '86 1.8 L estate |
#2
|
|||
|
|||
Thanks lads, bit more reassuring, will have a closer look in daylight at the weekend, it is a Pinto with a type 9
Engine looks geat Ash, there's hope for mine then. Anyone any thoughts on whether I should keep the carb and and ESC II or should I bin them in favour of something else. |
#3
|
||||
|
||||
Quote:
I'd prefer to keep it standard with the carb and ESC. Others like bike carbs and Megajolt. But I am an old fuddyduddy....
__________________
. . David. Heaven, Warm days and Cool rides |
#4
|
||||
|
||||
it depends if you want an air filter sticking out of your bonnet or not.
well thats what it come down to for me. i fitted motorbike carbs with a megajolt electronic ignition controller, has turned out to be a really good little setup. the car runs much better than it did on the old webber carb |
#5
|
||||
|
||||
Welcome to the forum
A very warm welcome to the forum DavidR
Personally, I would not worry too much about the dirty Pinto engine .... Good strong engines but didn't have the best of rocker cover gasket's. That said, they usually stay dry untill the rocker cover gets a tad over tightend Your build budget will help you decide if you keep the standard engine set up or not. If your budget is tight or you prefer to spend extra money in other areas .... Keep the engine as is. If you feel that you need a performance boost from the engine ..... There's plenty of options to choose from .... at a cost !! Which ever way you decide to go, all the help you need will be found here. Enjoy your build
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#6
|
|||
|
|||
Last run in the sierra
Took the sierra for steam clean today, ran great and no oil anywhere now, except for wher it should be (hopefully).
Tax runs out end of month so it's going on SORN the it gets the big stripdown |
#7
|
||||
|
||||
Welcome David,
Congrats on first post and build start - new builders are coming thick and fast now...... Engine will be a pinto on type 9 box, car was designed around this setup and so will be fine. If car runs sweet engine will be fine, likely a routine change of gaskets and seals and all should be fine. All the Best......AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#8
|
||||
|
||||
I would be more suspect if the pinto was clean
make sure you offer any useable donor parts to the sierra boys ( or I can do this for you ). Wel done on your first forum post ever. Another 20,000 and you will catch up on my combined total over the last 10 years TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#9
|
||||
|
||||
i would agree with twinturbo. it would be more suspect if it wasn't mucky they are old engines with cork gaskets so if they they have never been changed then its a normal sight
here is a picture of mine before i cleaned it all up and replaced all the gaskets come out ok in the end though welcome to the forum everyone here is very nice and helpful. at the top of each page there is a search button that will drag up the answers to most questions if not then just start a new thread and ask. you will soon get the hang of it. make sure you check out the Book Amendments and Extra Guides Section as it will make life easier when starting to fabricate stuff. http://www.haynes.co.uk/forums/showthread.php?t=2430 Last edited by AshG : 3rd March 2010 at 12:57 AM. |
#10
|
||||
|
||||
Bienveneu David.
Good luck with your build. Sounds like you're off to a flying start, with a donor already. Don't forget to ask plenty of questions. No matter how silly they seem to be. There is no such thing as a stupid question if you don't know the answer. Beleive me I've asked a few.... You say it's your first post anywere. Well you found the right forum then We are more like a big huggly family than the the normal forum you'll find. We don't even need a Moderator to keep us inline.. We got Handyandy... Ps. Where are you located?
__________________
. . David. Heaven, Warm days and Cool rides |
Thread Tools | |
Display Modes | |
|
|