Retaining front lip of bonnet

[Josh]

Hi all,

I have a pair of aero latches to hold down the back of my bonnet. Has anyone had any success building a 'tongue & groove' between the nose-cone trailing edge and bonnet leading edge?

Failing that, I'll just use a second pair of aero latches at the front...

Thanks!
Josh

[Ben_Copeland]

The equinox nose cone / bonnet has tongue and groove connection but I wouldn't trust it past a location device to line the two up.

Much better to have a locking device because once wind gets underneath it's taking off !

[Rosco]

i made these and bolted in the nose lip. and two holes in the bonnet,

[vmax1974]

I would use catches front and back on either mine equinox and agm bodywork

[RichardH]

Originally Posted by vmax1974

I would use catches front and back on either mine equinox and agm bodywork

good cause i have bought four catches

[SeriesLandy]

I've got catches front and back on mine. I had an oh shit moment last year when I had only do up one side. The bonnet tried to come off at 60mph.
They still held though.