|
#1
|
|||
|
|||
mx5 wiring bits question
OK so Im plugging away at the wiring and following some good diagrams bit I have found a few things that I am not sure of what they are ......
I know its not in a haynes but I did start one! the chassis is on my shed wall!! first the rats nest, I have tracked and labeled everything in blue and then marked the keepers in red (things that I can reattach to the motor) [IMG]http://[/IMG] but what are these 1, the heavy blue wire coming from the fuse box? its a single spade connection 2,the small yellow connector that is with the coil connections 3,this thing, its a bit of an orphan
__________________
Haynes MX5 based New Zealand |
#2
|
|||
|
|||
and part 2
4, the brown one here, its on the connection that heads to the radiator and lastly what it looks like in my chevron
__________________
Haynes MX5 based New Zealand Last edited by johnl63 : 7th May 2014 at 07:19 AM. |
#3
|
|||
|
|||
Quote:
David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#4
|
||||
|
||||
1, the heavy blue wire coming from the fuse box? its a single spade connection.
Attaches to the Heater unit I believe, mine attaches to nothing. 2,the small yellow connector that is with the coil connections. Pretty sure there is an ECU temp sensor just near the coils that this plugs in to. 3,this thing, its a bit of an orphan Not sure but a readable picture will help identify it? 4, the brown one here, its on the connection that heads to the radiator I think this one is also a temp sensor for the cooling system. What colours are the cables going to each of the plugs because that will help a lot to identify them? Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024 |
#5
|
|||
|
|||
__________________
Haynes MX5 based New Zealand |
#6
|
||||
|
||||
The last one is a relay. Other than I don't have a clue.
|
Thread Tools | |
Display Modes | |
|
|