|
|
|
|
#1
14th September 2009, 10:29 PM
|
|||
|
|||
Camber adjuster Bolt, Jig
made this today as an alternative to the jig in the book, just thought i would share it with you guys, will be converting all the jigs to sheet metal, find it easier this way, as im new to all this fabrication stuff.
 [/IMG]
|
|
#3
15th September 2009, 10:36 AM
|
||||
|
||||
|
New to fabrication, is that why this looks like it's been punched on a an Aries and bent on a promecam? Nice work there fella.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334
|
|
#5
15th September 2009, 11:06 AM
|
||||
|
||||
With a nice jig like that you must be able to make the adjusters in no time (ie cheap) .........I'll take 2 off you !
|
|
#6
15th September 2009, 01:01 PM
|
|||
|
|||
|
by new to fabrication i meant to welding bits of metal together and making things, i do the programming etc for the punch now, but used to work the pressbrake, plasma and punch, picked up a welder for the first time about 2 weeks ago,
It was punched on a trumpf punch and folded on an lvd pressbrake, thanks for the comments though,
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
