|
|
|
|
#1
22nd September 2014, 08:45 PM
|
|||
|
|||
Vodou engine mounts
Sorry for all the questions, i will figure this all out and get started soon.
So iv got the book (well had both for ages now!) and iv down loaded the saturn and vodou plans for using a mx5 as a donor. The saturn plans are more complete but just wondering if there was ever any engine mount plans for the vodou as they seam to be missing? Chris 
|
|
#2
22nd September 2014, 09:03 PM
|
|||
|
|||
|
To make things very simple for your self just use the engine mounts that come bolted the engine it will put the sump 40mm below the chassis rail. Put a plate that spans between BR1/BR8 + BR2/BR9, add full length gussets to each side between that and a contact plate set at 35'. It took me around 2 hours to make a pair for mine or around 3/4 of day with household tools.
 
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population. Direct email talonmotorfabrication@gmail.com Last edited by TalonMotorFabrication : 23rd September 2014 at 05:02 PM.
|
|
#5
23rd September 2014, 07:13 PM
|
||||
|
||||
|
I made these using 50x100 box 3mm thick. I welded plates to the chassis to bolt these mounts to. You can get the engine in just the right position and height if you do this way.
|
|
#6
23rd September 2014, 07:15 PM
|
||||
|
||||
|
Better picture here.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
