|
|
|
|
#1
23rd February 2010, 12:02 PM
|
||||
|
||||
IVA Indicators
I was looking at my side indicators last night after reading up AshG fail points. The indicators I got from Car Builder Solutions were sold as SVA ok and don't even have an E mark on them? I assume they need an E marking? Or is it only a problem if they have the incorrect E marking?
I read through the IVA manual and couldn't see any specific requirement for an E mark on the side indicators. Edit. For reference, these are what I got. http://www.cbsonline.co.uk/side-repe...r2a-1679-p.asp Last edited by deezee : 23rd February 2010 at 12:05 PM. 
|
|
#2
23rd February 2010, 05:27 PM
|
||||
|
||||
|
these were the ones that i failed with. they have listed the emark they have now rather than that they are IVA ok
http://www.cbsonline.co.uk/slimline-...009-1683-p.asp you don't have to have an e mark but if they do it must be the correct e mark if they don't have an e mark they must emit the correct light Last edited by AshG : 23rd February 2010 at 05:33 PM.
|
|
#3
23rd February 2010, 05:35 PM
|
||||
|
||||
|
e1 Germany
e2 France e3 Italy e4 the Netherlands e6 Belgium e7 Hungary e8 Czech Republic e9 Spain e11 the United Kingdom e12 Austria e13 Luxembourg my markers were E11 but still failed because they were side markers
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
