Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 8th March 2013, 12:38 PM
Not Anumber Not Anumber is offline
Senior Member
 
Join Date: Sep 2011
Location: Southend on Sea. UK
Posts: 243
Default downdraft Weber auto to manual choke?

Does anyone happen to have the bits to convert a 32/36 or 38/38 weber from auto choke to manual ?
If you have the remains of an old downdraft weber buried under a pile in the garage please can you see if it happens to have the bracket and bits on it for the manual choke cable please
Reply With Quote
  #2  
Old 9th March 2013, 12:53 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Make a bracket to hold cable outer and fix center wire cable to the bar that would fit into the spring/coil heater from the autochoke.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #3  
Old 10th March 2013, 06:58 PM
Not Anumber Not Anumber is offline
Senior Member
 
Join Date: Sep 2011
Location: Southend on Sea. UK
Posts: 243
Default

Have you done that sucessfully ? How did you close off the vaccum ?
Reply With Quote
  #4  
Old 10th March 2013, 08:18 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Many moons ago,used to work for garage that was Weber dealer.

I would think it would be not available as carbs are older than grass these days and anyone under 25/30 would not know how to adjust one

Only thing you will need vac for is advance capsule on dizzy.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #5  
Old 12th March 2013, 12:16 PM
Not Anumber Not Anumber is offline
Senior Member
 
Join Date: Sep 2011
Location: Southend on Sea. UK
Posts: 243
Default

I like that idea of a DIY conversion so have just bagged a manual choke kit for a different carb on Ebay for peanuts to give me a useable cable and hopefully be able to adapt some of the brackets and bits. It has to be better than paying the £ 58 or more they are asking for the Weber one.

Ive spent some time adusting the auto choke and it's now fine for starting but it idles too high and then drops down to a standard idle too soon so a pain at roundabouts and junctions.
Reply With Quote
  #6  
Old 13th March 2013, 08:35 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

That was the beauty of the auto and had steps inside to stop it doing exactly that,they were adjustable but prone to fail.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:37 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.