|
#1
|
|||
|
|||
Sierra Lighting Cluster Wiring -Help
Help,
I have spent a good few afternoons stripping back the orignal sierra loom to expose the front and rear lighting circuits for ease of fixing and simplicity in the final installation. However, I feel reasonably confident with electrics but am stuggling to match the 'The Haynes Sierra XR4x4i black & white wiring diagrams" to the installation. Part of the issue has been caused by selling the front and rear lighting clusters a little to quickly! What I need to do is identify which lights are in the main front cluster and the colour of the wires that connect to them. High Beam / Low Beam Sides Another bulb? Indicators and fogs? in the bumper lens In the haynes manual the cluster is just marked 1,2,3,4,5 Guess this is a question for Twin Turbo! Thanks in anticipation!
__________________
http://www.flickr.com/photos/29404787@N03/ http://www.flickr.com/photos/41021922@N03/ http://www.flickr.com/photos/56936222@N04/ http://www.flickr.com/photos/79486076@N06/ Finished my roadster after 5 years! Number 27! Last edited by Spikehaus : 21st June 2010 at 03:21 PM. |
#2
|
||||
|
||||
Will have a look at the official diagrams when I get home.
What year was the Doner? Headlights contain - Main & Dipped combined unit Side Main Beam seperte unit. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
|||
|
|||
Mmmmm,
That makes sense, an additional main beam unit. Guess that was an optional extra.
__________________
http://www.flickr.com/photos/29404787@N03/ http://www.flickr.com/photos/41021922@N03/ http://www.flickr.com/photos/56936222@N04/ http://www.flickr.com/photos/79486076@N06/ Finished my roadster after 5 years! Number 27! |
#4
|
||||
|
||||
If the wiring for the headlights is the same as my donor, the Haynes manual was spot on.
Left Headlight White = Main beam +12v Yellow = Dip beam +12v Grey/Black = Side light +12v Brown = Earth Right Headlight White = Main beam +12v Yellow = Dip beam +12v Brown/Green = Earth for headlight through dim/dip relay Grey/Red = Sidelight +12v Brown = Sidelight earth Hope this helps. Cheers Gus |
#5
|
|||
|
|||
Thats great gus, did you have 2 nr white wires on each headlamp?
__________________
http://www.flickr.com/photos/29404787@N03/ http://www.flickr.com/photos/41021922@N03/ http://www.flickr.com/photos/56936222@N04/ http://www.flickr.com/photos/79486076@N06/ Finished my roadster after 5 years! Number 27! |
#6
|
||||
|
||||
I just had the wires I listed. The wiring for the second main beam bulb was an integral part of the head lamp.
Hope this helps. Cheers Gus |
Thread Tools | |
Display Modes | |
|
|