Got Me Doner

[K4KEV]

Got my hands on a sierra doner 1.6 pinto engine with 65k and sounds sweet
250 notes delivered to the door, also got me a very nice set of alloys & tyres off ebay and going to pick up main steel tomorrow from marshalls of Peterlee ....6 lengths of inch and 2 lengths of 3/4 for £96.00 So I guess I might have to start on the build soon (well after I have promised to do all the "little" jobs I had promised er indoors ) as got t keep gaffer happy
will try to keep updated
K4

[tkpm]

Nice one K4, now the fun begin's.

Don't forget to post pictures and updates of your build, what size ally rims have you got.

Terry

[K4KEV]

Hi Terry
5 spoke Dezents at 17"....came off a Saph cossy don't half look the dogs even just sitting in a pile (and will be staying there for some time yet ) Still a ways off starting as still in the process of collecting but envisage starting the chassis in a month or so
Kevin

[HandyAndy]

Nice one Kev
You,ll soon be having fun stripping your donor

Thats a very good price for the steel, what lengths of steel are they supplying? as you may want to get an extra 20mm box length, also is the steel ERW ?

best wishes for your build

cheers
andy

[Bonzo]

Well done on finding your donor Kev

You may find that you need to collect an extra length of each size square tube !!
It has been a very long time since I made my chassis but I seem to remember that was the original quantity I had delivered & ended going up for an extra length of each

Not saying that the chassis can't be cut from that quantity but it will be very tight & don't forget, the jigs will use some of the 25 X 25 !!

[K4KEV]

not a problem getting additional steel as the supplier is approx 10 mins from where I live ...Andy the lengths were 7.5m and I 'm fairly certain they are ERW their website is dwmarshall.co.uk.... I phoned around all the usual ones, Parkers, Carters, Pheonix, Corus, but really wanted a local one and hey it is right on my doorstep they even beat Pheonix's qoute...check them out, saving a few quid here and there soon mounts up.

[mark]

Originally Posted by K4KEV

Hi Terry
5 spoke Dezents at 17"....came off a Saph cossy don't half look the dogs even just sitting in a pile (and will be staying there for some time yet ) Still a ways off starting as still in the process of collecting but envisage starting the chassis in a month or so
Kevin

Nice wheels but 17" are big for a seven style car, im a fan of bigger wheels and had 20"s on my last tintop but am sticking with 15" on the roadster for maximum acceleration and it will be nice to not have to fork out a fortune on tyres for a change as they wont be lasting long

Also what width are they? the reason i ask is the front cycle wings, they must cover the full width of the tyre for IVA, so check you can get wings to suit the width of your tyres. Im using the saturn ones and they wouldnt cover much more than 195 tyres.

Not saying you dont use them just letting you know the slight draw backs of bigger wheels

[gingea1pom]

Mark,

I like large wheels as well and kinda like the idea of 17’s. Ash was trying to dissuade me.

With reference to acceleration, if the rolling radius of the 17’s was the same as the 15’s I would assume the acceleration would be the same.

The problem is as you have said the width.

Hijack over.

Cheers Ginge

[K4KEV]

Hi Mark
yes I had thought about the width and I need 9" minimum tyres are 215's I know I am opening a can o worms but I coulod not resist those rims and I will do my dammed'st to get them on wheeeeel see eh I would not like to break with tradtion and make the roadster purposley harder to build than it already is