Ebay Haynes supplier - Louthyz

[jps]

Anyone used this chap? I have just purchased a pair of Pinto engine mount plates and the upper harness mounts.

http://www.auctiva.com/stores/viewst...146&styleid=12

Mostly I don't see why people who have decided to go 'Haynes' would get the simpler plates cut - but I didn't feel so bad about leaving it to someone else to worry about threading the harness mount bar and aligning the engine mount holes perfectly... :-D

[sparkybagnall]

I ordered cp 16 and 17 from gillham online the other week very cheap compared with eBay good quality parts just a little hard to get hold of but other wise I'd deffinatley order from him again

[Richard Dryden]

I've used those people off eBay for odd bits and pieces must say good service and nice parts so no complaints, would be more than happy to recommend them

[Stot]

I have used him for my pedal box so far and will likely get him to do my engine mounts.

I'm building an MX5 based roadster and he didn't have the design so I sent him the CAD files and he did them custom for me with really quick turnaround.




Cheers
Stot

[TheArf]

I had a look at his bits for sale he is charging £17 to powdercoat them thats quite expensive seeings as powder is £5.99 for half kilo and you would use next to nothing on that

Arfon

[robo]

Originally Posted by TheArf

I had a look at his bits for sale he is charging £17 to powdercoat them thats quite expensive seeings as powder is £5.99 for half kilo and you would use next to nothing on that

Arfon

If that was powder coated it would just flake off. Its probably done properly and blasted first to key it up hence the cost. That or its a bodge and a rip off

Bob