One for the electrical gurus........auto switch off

[thailoz]

I have an Idea but not sure how to go about it

I want to have some of my switches auto reset when ign is off.. for example :-

Fuel pump circuit

What I would like is when the ign is on I could push a momentary on button which will then switch power to my fuel pump also lighting an ind lamp telling me I have power.
Then when switch the ign off the switch resets ,so that every time you get in the car you have to push the button to start the car (sort of security device if you like).

So can any one shed any light on how to do this please.

Laurence

[davedew]

I would have thought if you used a latching relay that was fed from an ignition switched feed would do this.

Turn ignition on to provide power. Momentary push switch to earth relay and activate.
Turn ignition off, relay looses power and resets.

[thailoz]

Maybe ive answered my own question

would this work I dont have any relays at the moment to test it




any comments or additions greatly appreciated

[SeriesLandy]

You could do this with a 4 or 5 pin relay.
I'm assuming that you want to be able to switch the fuel pump off (hidden switch for security?)
If you were going to use the 5 pin, what is the purpose of the link between pin 86 and 87? All that does when the relay is active is feed the power back to pin 30.

[Stot]

The link from 87-86 would provide live to the coil only after the momentary switch had been pressed once and while the ignition is still switched on. Turn off ignition and you need to press the switch again to power the fuel pump.

It would work however you have fuel Pump - on your diagram and that system would provide fuel pump +

Cheers
Stot

[SeriesLandy]

Now stot has explained it, yes it would work. I didn't realise that that was a momentary switch.