|
#1
|
||||
|
||||
Things that would have made the book better
First of all, thanks Chris for all the hard work designing the roadster and putting the book together. It's great. However, I have caught myself looking for certain curious pieces of information that aren't in the book.
First of all, a general draft of a complete roadster would be useful. What are the overall dimensions? What are the front and rear track and wheelbase? This info would be useful, e.g., when planning parking space for the roadster in a cramped garage. Then, it would be interesting to know what to expect in terms of performance, if we go 100% by the book. What was the prototype's curb weight? What sort of acceleration it had with a standard Pinto (0-62 mph and 1/4 mile)? In the book there's a lot of background info on various processes such as MIG welding, GRP, painwork, etc. I think at least minimal advice on metalworking technology would be very useful. E.g., recently there's been a thread on this forum about methods for cutting tubes. What is a sane choice if one has just the tools suggested in the book -- an angle grinder and a hacksaw? Would one cut all the pipes manually, or would a handheld angle grinder with a cutting disk be good enough? Then, what about the 24 suspension brackets? That's the best way to fabricate them? What about the 10 mm rear upright plates? There are mentions of alternative donors, but what are the actual dimensions of relevant parts and assemblies, e.g. Sierra diff and rear driveshafts? There is some information about making GRP nosecone and wings, but what are the usual dimensions for these things? How high does the nosecone usually stick out above the upper rails? Finally, the roadster has been designed in a CAD, so software readable drawings could theoretically be made available for people to download, explore and modify. Frankly, that's what I expected to find here when I first learned about this forum. In my field, computer programming, it's customary for a book author or publisher to offer all the code examples given in a book as a download (sometimes a CD-ROM tacked to the back cover), so that people do not have to type the examples from paper. What has happened here instead is that people started recreating CAD drawings from paper and then sharing them on the forum. Luckily, thanks to this forum, most of these questions and ideas can be addressed long after the book has gone to press, and some of them already have. |
#2
|
||||
|
||||
all the questions that you ask used to be on the forum until last week. there was a major problem and nearly 2 years of information has been lost. there are cad files available for download
http://www.haynesroadster.pwp.blueyonder.co.uk/cad.zip |
#4
|
||||
|
||||
wasnt cadfael a bald priest?
sorry had to be done again |
#5
|
||||
|
||||
I just spat my beer out when I read that!
|
#6
|
||||
|
||||
Quote:
Quote:
|
#7
|
||||
|
||||
Whilst I understand the angle that you are coming from. You need to understand the constraints put on the Author by the publisher.
Anyone who has read the original Ron Champoin book will probably agree that Chris Gibbs has done a far superior job. With the limited page space that Chris had, it would have been impossible for him to include detailed drawings & dimensions of every possible alternative donor. Performance figures would have been impractical due to the large number of diff ratio & engine combinations. The dry weight of the book car is stated somewhere in the book, Kerb weights are dictated by the formula that is applied by the government inspecting engineers, in the uk, Ministry of transport, IVA regulations. Chris has done a splendid job & gives this forum his full support Do folk remember how comprehensive Haynes workshop manuals used to be compared with the new style titles that are now more or less, service guides EDIT I think the keyword of the books title is quite relevant " On a budget " This book has been published at a remarkably low price. What sort of price would a more comprehensive publication command !!?? Not uncommon to pay several hundred pounds for technical publications. Just food for thought !!
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk Last edited by Bonzo : 1st August 2009 at 09:12 AM. Reason: More text |
#8
|
|||
|
|||
I agree with you bonzo, the book is well put together with relation to publishment cost and constraints,
just a few parts that would have made a difference, like dimensions for grp etc. |
#9
|
|||
|
|||
Last paragraph of Ronnie's post hit's the nail squarely, it would be a fifty pound book and the concept of a budget vehicle is completely out the garage door.
Interesting post though Alga ! |
#10
|
|||
|
|||
Quote:
Just want to echo alga's point of some curious omissions, I realise the old forum was hacked & some of this info was floating about, but mainly (after a brief skim through) can't see an obvious side/front/top view of finished vehicle displaying dimensions i.e wheelbase, overall length, track, width, height etc. I would've thought was kind of essential for the majority of builders who may be looking to build in the confines of a 1 car lock up. Is this info available? (I've downloaded the CAD files but they've not helped ) Otherwise it all looks very comprehensive & the mind's running riot already! |
Thread Tools | |
Display Modes | |
|
|