|
|
|
|
#1
7th January 2010, 11:48 AM
|
|||
|
|||
Pedal box?
Can you guys help?
I remember reading a thread on here about making the pedal box and CP16 out of one complete sheet of 3mm Looking at the drawings it shows CP16 (1mm) as being 277 width and 210 Height. Pedal box 284mm width (which does include the 16mm section angled at 20 degrees and height as 150mm. My question is if I made the plate 284mm wide, how tall would it be in one piece?. I cant add 210mm and 150mm together because they overlap.  
|
|
#2
7th January 2010, 12:05 PM
|
||||
|
||||
Hi,
It needs to fit between TR8 and BR10. So that is your height. I make it about 355mm, looking at the book HTH David
__________________
. . David. Heaven, Warm days and Cool rides 
Last edited by dogwood : 7th January 2010 at 12:07 PM.
|
|
#3
7th January 2010, 12:14 PM
|
||||
|
||||
|
and i would suggest that if you are making it as one piece then make it out of 3mm steel
 cheers andy
|
|
#4
7th January 2010, 12:50 PM
|
||||
|
||||
|
This is something we do as a standard part, http://www.3gecomponents.com/templat...partment=11 8
Calculating the fold length is a bit more complicated than you would imagine, what size are the V's in you brake press? This is not something you can fold in a hand bender. Kind regards John
__________________
Quality parts for the Haynes Roadster - manufactured to a standard, not down to a price. Contact us at component-sales@hotmail.co.uk or visit our website www.3gecomponents.com
|
|
#5
7th January 2010, 01:14 PM
|
|||
|
|||
|
I already have the 3mm steel.
So will be making whilst saving the money to buy the chassis complete from Talon. I dont have a chassis to check or that would be really easy to do. I cant see it being 355 unless your assumption is with the folds as well. But even that does not add up properly. 150+25+27+53=255 plus the CP 16 plate of 210=465. I cant see how 110 would be overlap in the two plate system. On page 47 Fig 4.21 it shows the CP16 plate, what I need is the distance between the top of CP16 to the top of BR9. Then I can allow for all the folds later. If its not that easy then I will just revert back to the book and make in two parts. Cheers guys for you help with my stupid questions.
|
|
#6
7th January 2010, 01:57 PM
|
||||
|
||||
|
Before you go any further I would suggest a little vist but be warned wrap up warm!
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334
|
|
#7
7th January 2010, 02:51 PM
|
||||
|
||||
|
Quote:
you will need to add another 25mm ish for the bends Not sure where you're getting 466mm from David
__________________
. . David. Heaven, Warm days and Cool rides
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
