|
|
|
|
#1
26th January 2010, 08:10 AM
|
||||
|
||||
Fuel pump, (Lazy question)
Morning guys.
Anyone know the exact location of the fuel pump on a 2.0 efi Sierra. I'm just being lazy, I haven't even started to look for it yet. But it's bstd cold outside today, so hoping someone will know. Save me hunting around for it, freezing me berejeebers off...   I'm hoping I can use the original rather than buying a new one. Any opinions appreciated Cheers
__________________
. . David. Heaven, Warm days and Cool rides 
|
|
#2
26th January 2010, 09:10 AM
|
||||
|
||||
|
My Haynes manual don't cover the 2 litre EFI sierra
 But if it is the same as the 2 litre DOHC it'll be in the tank ............Very much, same as fitted to the Mudaneo & Escort Zetec engined cars  Can't remember if there is an access plate under the rear seat, so as you can lift out the pump & sender assembly !! Dare say you can soon make one
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie  www.roadster-builders.co.uk
|
|
#3
26th January 2010, 09:46 AM
|
||||
|
||||
|
Mine was in the tank too j reg dohc estate, but earlier cars had a separate one which you should find near the tank.
turn the ign on and you should hear it near the drivers side rear wheel arch theyre normally in a separate cradle and have a large inlet and a smallr banjo fitting outlet hope this helps Ray
|
|
#4
26th January 2010, 10:14 AM
|
||||
|
||||
|
i wouldn't turn the ignition on he's took the engine out so it will piss fuel 30foot across the garden
it will be in the tank dave. the easy option is to drop the tank out of the car then take it in the warm to play.
|
|
#5
26th January 2010, 10:58 AM
|
||||
|
||||
|
What year sierra is it.
Pre 90 Spec has external pump mounted on the spare wheel well. Post 90 has intank pump Unless it's a cosworth and they all had external pumps. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#6
26th January 2010, 12:43 PM
|
||||
|
||||
|
Thank's for the replies guy's.
Glad I didn't spend all morning underneath it looking  Assuming that it's in the tank then ( It's a Jan 1990, TT) I don't fancy the idea of refitting in the new tank. Therefore I will need an external one. Is this the type of thing I need? http://cgi.ebay.co.uk/Facet-Type-Ele...em5634f 20f9c Again any advice appreciated Cheers
__________________
. . David. Heaven, Warm days and Cool rides
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
