what paint do i use

[steve8274]

hi
i am getting ready for rebuilding engine and would like to paint engine and gearbox.
what is the best paint to use and do you need primer/rust treatment first. (i have removed rust wat i can see)
is the paint expensiveand how much is required to do both engine and gearbox
thanks

[Jimmyd]

A bit of degreasing, wire brush and paint with Hammerite is as good a job as any. Use the smooth finish. Done this a few times long lasting tough finish.

J

[AshG]

i did my block and head with spray can hamerite. gives a much better finish but you have to make sure that you cover up every little nook and cranny.

[AshG]

took the best part of 3days to get it like that. the only way to get a really nice clean engine is to fully strip degrease, de-rust, degrease again, wash off in solvent bath, then paint.

[steve8274]

wont the hammerite come off with heat. thought i read on can it only goes to 60 degrees?
how long will it last
thanks

[twinturbo]

Engine Enamle

TT