|
|
|
|
#1
31st May 2010, 04:29 PM
|
|||
|
|||
newbe
Hi there
Great forum.....been looking in every now and then to get ideas before I start my own project.....this weekend I hope....wife allowing...... I am a toying with the idea of using a bike engine,since I can get my hands on a cheep ZZR1100, however, I am a bit concerned about the reversing problem...my problem being, I cant afford a reversing box..am working on a few ideas at the moment, but all suggestions are welcome. So be warned everyone....I will be on here a lot asking loads of probably stupid questions.. 
|
|
#2
31st May 2010, 04:48 PM
|
||||
|
||||
Welcome to the forum Angel
Hi Angel
A very warm welcome to the forum  If you are thinking of using a bike engine, I believe there is a lo-cost option for a reverse gear. To put it simply, it consists of a gear wheel that fits on the diff flange & is operated by a starter motor  I expect one of the bike engined builders will provide some better details at some point. Any questions, ask away, no question is daft if you don't know the answer
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#3
31st May 2010, 05:51 PM
|
|||
|
|||
|
Welcome to the forum fellow newbie, this forum is fantastic for info and advice.
Their are some very experienced people on here, I for one am already picking their brains Here's to Roadster ownership 
__________________
Failed builder 
|
|
#4
31st May 2010, 06:04 PM
|
||||
|
||||
|
Angel.
Afternoon and welcome to the friendly forum. Good luck with the bike engine, there is loads of info on the forum that can be found with a good search failing that ask and we will provide!  Are you planning for a ‘Q’ plate? And where are you based? The more people that build the more likely that someone will be living around the corner! Cheers Ginge
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread
|
|
#5
31st May 2010, 07:13 PM
|
||||
|
||||
|
A warm welcome to the forum Angel,
I,m sure you,ll find all the help & advice you,ll need to build your BEC from this forum There has been a BEC Roadster that has recently passed the IVA test by forum member Tilly819, A stunning car that was on display at the stoneleigh show, have a look thru the forum threads for his posts about his build, lots of useful info for building a BEC Roadster  Enjoy the forum & most of all, enjoy your build . cheers andy
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
