|
|
|
|
#1
9th June 2010, 06:07 PM
|
|||
|
|||
pedal box help
I have started to make my peadl box but I just cant, get my head round the books dimensions on page 54
 the back plate is 268mm wide plus 16 mm for a bend = 284 mm and this plate fits between U6 and U7 then bolts flush to to CP 16 . The gap between U6 and U7 is 260mm on my chassis can I just trim the back plate down ? also what is the bend for ? cheers Rob 
|
|
#2
9th June 2010, 06:16 PM
|
||||
|
||||
|
Not sure why you have a difference between the chassis and the peddle box
I don't have the book to hand But yes you can just cut it down to fit. I have no idea what the bend is for. Mine's been finished 2 years now. Ignore this,I'm talking B****x
__________________
. . David. Heaven, Warm days and Cool rides 
Last edited by dogwood : 9th June 2010 at 06:49 PM.
|
|
#3
9th June 2010, 06:38 PM
|
||||
|
||||
|
The plate fits against the chassis uprights, not between them the bend is to line up with U6, which is at an angle to U7.
Hope that makes sense. Kind regards John
__________________
Quality parts for the Haynes Roadster - manufactured to a standard, not down to a price. Contact us at component-sales@hotmail.co.uk or visit our website www.3gecomponents.com
|
|
#4
9th June 2010, 06:41 PM
|
||||
|
||||
|
Quote:
My bad, misread post. Yes as John says against not between....  This is how mine looked (unfitted I'm afraid) 
__________________
. . David. Heaven, Warm days and Cool rides
Last edited by dogwood : 9th June 2010 at 06:47 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
