|
|
|
|
#2
19th December 2010, 06:31 PM
|
||||
|
||||
As far as i can remember Misty there isn't one. All it says is that it must have a padded centre. I think the only relevant one says that "the steering must operate smoothly from lock to lock without undue stiffness" smaller the wheel the stiffer it is.
Sit to be corrected......  AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH 
|
|
#3
19th December 2010, 08:57 PM
|
|||
|
|||
|
Dont think you are allowed holes in the spokes either.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#5
9th February 2011, 07:56 PM
|
||||
|
||||
|
Anyone got ideas on how to 'pad' a wheel for iva?
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#6
9th February 2011, 08:29 PM
|
|||
|
|||
|
Use original Sierra and change later.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#7
10th February 2011, 08:07 PM
|
|||
|
|||
|
Quote:
If i remember right you didnt have donor, so if you need a sierra wheel let me know as i have my old one, free if you want it and im only 5mins from your build
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
