Cp3/4

[Angel]

I am just about to start making CP3/4. I take it that CP4 is a mirror of CP3? Can anyone confirm please.

[Talonmotorsport]

Yes you are correct cp3 is a mirror of cp4. A little tip here use a marker pen and write top and bottom or right and left on them before you pick the welding torch up!

[monsterob]

second that tip and make sure you mark it correctly i still have a set of wrongu'ns in my scrap bin !!!!

[Angel]

Thanks guys

[brainbug007]

I'm working on these as well at the moment, good to know I did it right. So many of the parts in the book seem to need to be oppisite from each other but are labeled as such :S Drilling the holes in these is pretty hard, already snapped a few drill bits trying to make pilot holes...

[Talonmotorsport]

If your having trouble drilling holes in steel heres a few tips. Use new drill bits for STEEL HSS, blunt or rusty bits may be ok for timber but steel needs to be cut in to. If you are using a variable speed pistol drill you need to run it slowly and this may sound silly but steel is hard and you need to push. If all else fails find a friendly person with a pillar drill.