|
#1
|
|||
|
|||
VW/AUDI engines
Hi everybody,
I have been looking at different engines for my car & have seen alot of the 1.8 turbos going on fleabay for not alot of money. I was wondering what gearboxes could be used with those. I would suspect alot of the engine parts would be coded to the car it came off. Has anybody used 1 ????? Good building.. |
#2
|
|||
|
|||
Bike engine, loads easier loads lighter and makes a better brand of noise
|
#3
|
||||
|
||||
You won't find an inline box from the VW stable.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#4
|
||||
|
||||
If you can make an adaptor ring or cut and shut an ali or steel bell housing you should be able to mate any gear box to any engine. Don't forget that you don't have to use a ford gear box there are other rear wheel drive cars out there. BMW Mazda Vauxhall Nissan ect.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#5
|
|||
|
|||
Alphax kit cars of holland do a conversion for vag motors to ford gearbox...good folk too.
|
#6
|
|||
|
|||
I will look in to making a adaptor plate, I have the mt75 gearbox already.
Very quick answers, thanks........ |
Thread Tools | |
Display Modes | |
|
|