|
|
|
|
#1
6th March 2011, 11:02 AM
|
||||
|
||||
Harness mount bosses
Where's the best place to get some 7/16 threaded tube to weld into the roll bar to mount the harnesses?
Cheers Dave
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. 
|
|
#2
6th March 2011, 12:33 PM
|
||||
|
||||
|
PM sent to you David
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#3
6th March 2011, 12:48 PM
|
||||
|
||||
|
I Got mine From 3ge, but then that doesn't really help does it
|
|
#4
7th March 2011, 07:40 PM
|
||||
|
||||
|
Thanks guys.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#5
5th April 2011, 10:02 PM
|
|||
|
|||
|
I am in need of some threaded tube for my upper harness mounts been searching but no joy, where are you guys getting them from?
|
|
#6
5th April 2011, 10:25 PM
|
||||
|
||||
|
As luck would have it, I recently spent a few days working on my lathe.
I have been utilising some of my surplus materials kicking about. Just happen to have 4 sets of harness bosses up for grabs They have been made from 19mm bright round bar & have been bored n threadded with the required 7/16" UNF thread, 50mm in length. £7.50 per set inclusive of postage. Drop me a PM if you are interested. Failing that, try Saturn or Talonmotorsport, I am sure that either of them will be able to help out
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk Last edited by Bonzo : 6th April 2011 at 09:09 AM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
