Wrong wheel oops

[rincewind23]

Hi all,
Won a set of wheels from eBay. Picked them up, only to find out they were from a Fiat, which has a 98mm BCD, whereas my hubs are 108mm.

Firstly, I know I'm an idiot, I should have checked before bidding

So I figure my options are:
1) Consider it an expensive lesson and relist on eBay
2) Convert the hubs to 98mm (drill new holes and refit bolts)
3) Get some wheel adapters

I would appreciate some advice from people who know a lot more about this than I do. Or even a little bit more than me (which is pretty much everyone - I'm making this up as I go along).

Cheers,
KEv.

[John.W]

Hi Kev firstly congratulations on getting the wheels u wanted. I have seen what can happen when wheels are altered to match hubs and it can go seriously pear shaped. I don't know if it is worth trying to change the hubs it depends what donor u R using. In my humble opinion i would put the wheels back on the Bay and buy some that will fit.

Regards

John

[ozzy1]

Definately easier to relist them on ebay.The other option is as you say to get the hubs 'modified' to suit,if you go this route get it done by an engineering company as you want it done accurately.Personally i would wait a week or two and relist them.

[rincewind23]

Thanks for the replies, guys. I figured putting them back on eBay was the way to go, just wanted to check there wasn't some easy way to work around my mistake.

I will start looking for some new ones, now I know what to look for!

Cheers,
KEv.

[minicountryman1961]

Originally Posted by rincewind23

Thanks for the replies, guys. I figured putting them back on eBay was the way to go, just wanted to check there wasn't some easy way to work around my mistake.

I will start looking for some new ones, now I know what to look for!

Cheers,
KEv.

maybe you could find some of those special offset lug nuts?

[twinturbo]

http://shop.ebay.co.uk/?_from=R40&_t...w=wobble+bolts