|
|
|
|
#1
18th June 2011, 12:54 PM
|
|||
|
|||
Engine in
Was having a great day yesterday fitted the wheels and dropped in the engine then I trial fitted the bonnet and found although I had allowed for the height of the engine block the carbs on my 1.8 CVH are higher and foul on the bonnet. Has anyone else had this problem ? Guess I need to reduce the height of the engine mounts to lower the whole thing down a little or I was thinking of usinng bike carbs does anyone have any pictures of them connected upto a 1.8CVH I assume they would connect up horizontally so be much lower ?
|
|
#2
18th June 2011, 01:12 PM
|
||||
|
||||
|
You'll find with the standard 1.8 CVH carb that the filter will stick up through the bonnet.
I have fitted bike carbs to mine, and with the new style Saturn bonnet everything fits under fine.
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt
|
|
#3
18th June 2011, 01:48 PM
|
||||
|
||||
|
i want one of those engine hoists and the barn to go with it
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/
|
|
#4
18th June 2011, 02:30 PM
|
||||
|
||||
|
Quote:
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#6
18th June 2011, 10:51 PM
|
||||
|
||||
|
I used gsxr 600 carbs. But any carbs from a 600 up should work ok once setup correctly. I made my own manifold up so I could angle them to fit wherever I wanted.
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
