|
#1
|
||||
|
||||
Where to buy bracket and plate sets in Sweden ?
Hello Everybody,
I'm building a Haynes Roadster (Chris Gibbs book), in Sweden. I want to order the suspension brackets set and a pre-cut chassis plate set. But from England, the postage cost is very expensive. Does anyone know where I can find these items in Sweden, or which company can make the cuts and bends on map ? I'm sure some of you have already made fabricated these items in Sweden. By the way, I'm leaving close to Växjö, and a supplier or a company in the neighbourhood would be great, but of course, I can also mail order these parts. Thanks a lot. Sylvain |
#2
|
|||
|
|||
Hi Sylvain, if you cant find a provider from Sweden then maybe I can help with chassis plates. But I'm from Estonia.
|
#3
|
||||
|
||||
I did'nt think £26 shipping for a basic chassis set to sweden was too bad considering a flat pack from London to Scotland was £62.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#4
|
|||
|
|||
Wheres ALGA
Just reading these posts from up round the Baltic area reminded me we haven't heard anything from Albert for a while- used to be a regular contributer.
ARE YOU STILL OUT THERE ALBERT Could be still 3 metres deep in snow |
#5
|
||||
|
||||
Talon, don't feel offended my friend, I'm not talking about you : you don't supply the complete chassis plate, don't you ? Only a "basic" one. So my problem is not your shipping cost, it is the fact that you don't supply what I want.
And the problem is not the shipment cost itself, but the proportion : when a suspension bracket set cost £30 and the shipment is £21 (one more time, it is not YOU I'm talking about), shipment is 70% of the parts cost. It is just ridiculous (I used to be a purchasing manager, believe me I know what I'm talking about) If I can find the same price level and quality in the country where I live, and save £20 or £25, I'll be happier to spend this money in beers with my friends rather than give it to DHL or the royal mail But I'm still looking for someone who can supply the complete chassis plates set AND the complete suspension brackets set. Mopple, thank you for the offer. Can you tell me how much you could sell a CP set and shipment cost to Sweden ? Can you also make the suspension brackets set ? Thanks mate. Ans sorry, don't know Albert, and I've been living in Sweden for a short time only, so, can't help |
#6
|
||||
|
||||
I'm not offended at all don't worry about it. I'm planing on supplying a full set of laser cut chassis plates and pedal boxes but I'm still waiting for the CAD guy to translate the drawings in to laser cutting programes.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#7
|
|||
|
|||
Quote:
Can give you the price for the cp plates and bent suspension brackets at the middle of next week. Madis |
#8
|
||||
|
||||
Oh, nice to hear that you missed me My Haynes project has been on a back burner due to pressures at work, but now I've taken a well-deserved vacation, so things should start moving again. Here I am back on the forum, too!
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
Thread Tools | |
Display Modes | |
|
|