![]() |
|
#1
|
|||
|
|||
![]() I'm looking for a starter motor for my build but not sure which one. I'm going to be running a 2.0L silvertop with 1.8 flywheel and type 9 box. Would I be right in thinking I should be after one from a twink?
__________________
Total cost so far Materials £3,150 Tools £855 |
#2
|
||||
|
||||
![]() i have a 2.0l black top with a 1.8 silver top flywheel to a type 9 box.
I managed to find a brand new gear reduction starter that is made to fit a 2.0l sierra pinto. Fits nice and turns over a treat but had to modify the black top sump as the starter fits the opposite side on a focus gearbox. Ok sounds complicated but most people can supply gear reduction starters that replace the OE lucas starters that do the same job, see my photos reason for gear reduction, smaller diameter caucus (motor) |
#3
|
|||
|
|||
![]() Im using cvh starter with mine and a 1.8 silvertop flywheel
Works fine just had to masasage the sump a little for clearance |
#4
|
|||
|
|||
![]() lucas LRS707 or equilvent
![]() |
#5
|
|||
|
|||
![]() Cheers lads. Looks like I need a CVH one then.
__________________
Total cost so far Materials £3,150 Tools £855 |
#6
|
|||
|
|||
![]() lrs707 type fits cvh sierra cvh, i4 dohc sierra and granada i4 dohc engines
think there is a diesel higher power one that fits but was unable to track down what one it was |
![]() |
Thread Tools | |
Display Modes | |
|
|