Rivets

[skov]

What size rivets do I need for the floor, and where can I buy some online?

Thanks!

[Tilly819]

I used 1/8th for everything mainly since i had a big box full in the workshop but id say they are a good size.

not sure were is good to buy them since i didnt have to buy these

[brainbug007]

I welded my floor on personally but shouldn't you also use an adhesive if you're using rivits?

[Bonzo]

I used 4mm rivets for my floor, as Tilley, I used this size because that's what I had here

Here's a site for sealed rivets & all sorts of fasteners, prices are not too bad but the postage adds to the cost if your not spending enough to qualify for free postage.

Sealed Rivets

Hope that helps

[robo]

When buying those rivets make sure that you get the right length, they need to fall into their grip range . To long and they dont bite and to short and they wont expand behind the hole.

http://allfastsolutions.com/pdfs/Rivet%20Chart.pdf

Bob

[skov]

Yeah, it's the length I'm worried about.
I'm going to use a 1.5mm ally floor, and I think my chassis rails are 2mm, but I'm not sure how much to allow for the sealant.