|
|
|
|
#1
28th January 2012, 02:58 PM
|
|||
|
|||
In the scrappy today
Was in the scrappy today and in the engine pile was a dinky v6 audi engine. Tape measure came out and it only measures about 550mm in height with a width of app 700mm to the ouside of the manifolds. i dont know bugger all about them but it is something that would fit under the bonnet of a roadster complete with no mods to the injection or anythig else.
Just thoughts. Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 
|
|
#3
28th January 2012, 05:36 PM
|
|||
|
|||
alphax do an adaptor kit to put that to an mt75 which is more than man enough.
http://www.alphax-kitcars.com/drukgroep%20039-1.jpg Bob 2.8 24v FSI V6 2xDOHC 190 PS (140 kW; 187 hp) 220 PS (162 kW; 217 hp) 3.2 24v FSI V6 2xDOHC 255 PS (188 kW; 252 hp) 3.0 TFSI (Supercharger) V6 2xDOHC 300 PS (221 kW; 296 hp) 4.2 32v FSI V8 2xDOHC 350 PS (257 kW; 345 hp) diesel engines all common rail (CR) Turbocharged Direct Injection (TDI) 2.0 16v TDIe Inline 4 DOHC 136 PS (100 kW; 134 hp) 2.0 16v TDI Inline 4 DOHC 170 PS (125 kW; 168 hp) 2.7 24v TDI V6 2xDOHC 190 PS (140 kW; 187 hp) 3.0 24v TDI V6 2xDOHC 240 PS (177 kW; 237 hp)
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 Last edited by robo : 28th January 2012 at 05:50 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
