Best cooling option.

[Eternal]

Hello everyone!
Can do with some advice. I need to fit a large radiator and intercooler in my nosecone. Have been toying with the idea of a 3 core civic radiator but im unsure about the heat load. Can any of you guys advise as to the max size of radiator that can fit in the nosecone but also fit an intercooler.

Any links pics or ideas welcome! Thanks a load want to order them over the next 24 hours so any information welcome!

[Eternal]

http://www.mishimoto.co.uk/64-66-for...-radiator.html is another option that may fit

[K4KEV]

Hi ET.....if you are struggling with finding an intercooler thats man enough for the job then consider a charge cooler and or water methanol injection I am fitting both to mine and expecting charge temps to be at or around ambient which equates up to 30 percent more atmospheric air ie more oxy, I think you might struggle with a air to air intercooler. you could just go with water/meth injection and not even bother with any intercooler ....and as a bonus methanol can be as cheap as 60p litre due to the bio diesel guys using lots of it you also cut it wit water to 50/50 so it is now down to 30p a litre another bonus is it allows more boost before the onslought of detonation and it also lifts your fuel grade by a couple of octanes......food for thought dude

[Eternal]

interesting! Something to think about for sure.

Another option i have found is using a radiator out of a westfield SEiGHT the 5 core job. These are designed for v8's so should be ok. Then use a 2wd escort cosworth intercooler... http://www.ebay.co.uk/itm/Cosworth-I...96589233258759 on top that should all fit quite well and not cost a massive amount. If temps are high still can look at a 2nd rad in the boot with a charge cooler. But im also thinking about having two oil coolers as well. So over all the temps i think will be ok.

[robo]

A discovery rad would fit in there easy. They come as a four core standard with drop in pegs for ease of fitment and measure <just pulled one out of the shed so this is right> 540mm wide x 450mm high x 75mm thick. That can cool a 2.5 td pulling 2 ton of 4x4 so it would cope with just about anything in a roadster. it also has the oil cooler in the tanks so thats another thing out of the way. A decent second hand unit would only set you back £30. They also have an intercooler that might be usable .

https://www.firstfour.co.uk/item/217...bly-for-200tdi

http://www.google.co.uk/imgres?q=dis...:429,r:1,s: 0


Bob

[baz-r]

a merc 190e has a very small rad 300x300x45mm and cools 1.8-2.3 motors and has been used to cool meny comp cars in the past

pritty heavy car with a fair size motor