Bonnet

[mgglep]

Hi everyone on the Saturn bodywork am I right in assuming the Saturn bonnet wide bulge is 1metre long so the gap between scuttle should be 1010mm thanks in advance

[mgglep]

Sorry I mean gap between scuttle and nose cone

[shh120m]

Its excactly the same legnth as the standard bonnet, fogive me for not knowing off the top of my head, il measure it up in the morning and post it up. As long as the scuttle is in the correct position and the nose is tight up against the front frame it will fit

[mgglep]

Cheers Nathen the scuttle meets the bend in the chassis doesn't it cabin side

[shh120m]

yes thats correct, you sometimes need to trim the bonnet to get an exact fit, depending on what size edge trim your using.

[mgglep]

thanks alot