|
#1
|
|||
|
|||
sierra drive shafts
Hi guys I have a question I recently got a sierra diff with one drive shaft a right hand drive shaft and then a got a drive shaft at a scrap yard but I did not remember if I had a left hand one or right so I got a right now I'm sitting with two rights and I would like to know if I can use it for the left hand side
|
#2
|
||||
|
||||
I have not checked mine but I am sure they are slightly different lengths and one has a right hand thread hub nut and the other left handed so would say no good dude....I sure some one will come along and confirm.
|
#3
|
|||
|
|||
As the saying goes: Two wrongs don't make a Right.
I'll get me coat |
#4
|
||||
|
||||
Yep different lengths.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#5
|
|||
|
|||
Thanks guys for your help guess I have to get a left just always thought they would be the same cause the diff is in the center and my drive shafts are the push in ones
|
#6
|
|||
|
|||
Diff is central in car but the actual diff itself is offset,interesting thing and dont know the answer is the Ginetta G20 shafts are equal length with Sierra diff.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. Last edited by flyerncle : 3rd June 2012 at 12:23 PM. Reason: Well spotted Rob !!!! They were Shat! |
Thread Tools | |
Display Modes | |
|
|