![]() |
|
#1
|
||||
|
||||
![]() Hi all,
I got a motorcycle end can today, and I'm trying to figure out how to attach it to the chassis. Does anyone have any ideas, or pics of how they done theirs? Ta, |
#2
|
||||
|
||||
![]() one moment whilst i look...
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
||||
|
||||
![]() A exhaust bobbin is mounted centraly in the valley of the pressed part of the clamp and the protruding thread removed. The bottom of the bobbin fits into the flat strip that attaches to the chsssis. Solid enough. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#4
|
|||
|
|||
![]() Ah ha. I was about to start a very similar thread.
How is that flat strip attached? Does something need welding into the chassis rails at an early stage - or is it another rivnut job (seems like kit cars are mainly made of rivnuts!!) That exhaust looks very nice by the way!
__________________
http://meandthekitcar.wordpress.com/ |
#5
|
||||
|
||||
![]() Yeah that's all I did I used an exhaust bobbin from halfords about £2 then used an exhaust clamp and a bit of flat
Have a look at this if you like http://m.flickr.com/#/photos/67605695@N04/7113738733/
__________________
17.07.10 "Now i know the meaning of life" My Build pics http://www.flickr.com/photos/67605695@N04/ http://www.flickr.com/photos/97412063@N08/ |
#6
|
||||
|
||||
![]() the flat strip is bolted to the floot, you can see the bolts.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
![]() |
Thread Tools | |
Display Modes | |
|
|