Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 10th March 2016, 11:59 PM
Josh's Avatar
Josh Josh is offline
Senior Member
 
Join Date: May 2007
Location: Bromley
Posts: 160
Default Side panel lower lip

Hi all

I'm considering doing away with the lower lip on my ali side panels and instead riveting them to the sides of BR 3,4,5,6. My reasoning for this is that my floor is already attached to the underside of these rails with sealant and rivets - I don't like the idea of going through that lot with another load of sealant/rivets.

My worry is that the resultant sharp edge would fall foul of the IVA 2.5mm radius rule. Does anyone know if this would be the case?

Thanks
Josh
Reply With Quote
  #2  
Old 11th March 2016, 09:24 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Leave enough on the panel and tap over the edge to fold onto floor and silicone it .
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.