|
|
#11
17th June 2010, 02:30 PM
|
|||
|
|||
Right here is the setup im doing for the mill.
X3 Small mill  Just picked these up from Parcel Farce had to pay them over 25quid in handling grrr + customs. It took them longer to move it from customs to Dorset than it took from the factory(usa) to england. oh well heh Geckodrive G540, 2x Keling KL23H2100-35-4B 381 oz motors for X and Y, 1x Keling KL34H295-43-8A 906 oz N34 motor for Z and 1x Keling KL-350-48 48V/7.3A PSU.  Will be getting the cncfusion delux kit when i got the stand and liquid cooling ready. Last edited by Eternal : 17th June 2010 at 02:34 PM. 
|
|
#12
17th June 2010, 03:43 PM
|
||||
|
||||
|
That's a nice setup - I got some very similar motorsfrom Keling and a similar PSU secondhand in the UK. Geckos are great bits of kit. I've alos got a touchscreen on mine which is brilliant - bought it for £9 as the glass unit and just glued it to the front of my monitor.
I recently added coolant on mine - thought these proper setups were a bit expensive so I bought a pond pump, a plastic box, some funnels and some hose and got the system going for £30 - then spent another £20 on proper locline for the hose. Works like a dream so far 
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c
|
|
#13
18th June 2010, 05:28 PM
|
|||
|
|||
|
Just got a phone call from the director of kit car type stuff from the Bournemouth DVLA had a nice long chat and he gave me his personal number. He confirmed that i can used the steering colum and axle along with a unwelded chassis kit from saturn to get a age related plate. Also he is sending me a load of forms/info. Unfortunatly due to current rules ect i cant get a custom vin but will be issued with a dvla one instead. No big deal what i really care about is a non Q. Real nice chap and he will be the one to inspect the car as well. So yeah fantastic news
|
|
#15
20th June 2010, 11:50 AM
|
||||
|
||||
|
Got to love a straigh6 though...
My usual choice of Propultion is a V6, wish I had gone with one on the galaxy rather than the 4pot. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#16
20th June 2010, 03:50 PM
|
|||
|
|||
|
bugger! had a look under the engine just to see whats what and i have the RB26DETT GTR sump
 its solid ally and huge lolrb25det rwd tin sump  rb26dett gtr sump/dif single cast.  Any ideas what i should do? Edit: ohh this is a cool idea  Last edited by Eternal : 20th June 2010 at 03:57 PM.
|
|
#19
21st June 2010, 03:48 PM
|
||||
|
||||
|
Get a steel sump pan.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#20
21st June 2010, 03:49 PM
|
||||
|
||||
|
I am amazed they cast the diff housing into the sump, sierra ones bolt on.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
