Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 2nd February 2011, 11:10 AM
whitstella whitstella is offline
Member
 
Join Date: Sep 2010
Posts: 50
Smile which clutch????

hi

i've got a type 9 gearbox with bell housing, but i seem to be short of the clutch arm. does this come with a complete clutch kit or have i got to find 1 seperate????? the engine i will be using is a 2l zetec with hopefullt a 1.8l fly wheel. what clutch kit do i need and release bearing???

cheers steve
Reply With Quote
  #2  
Old 2nd February 2011, 11:16 AM
jasongray5's Avatar
jasongray5 jasongray5 is offline
Senior Member
 
Join Date: Feb 2008
Location: Western Australia, Home is Devon
Posts: 354
Default

On my 1.8Zetec im using a standard mondeo clutch kit, but longer release bearing. Will try and find you the part number
Reply With Quote
  #3  
Old 2nd February 2011, 11:21 AM
jasongray5's Avatar
jasongray5 jasongray5 is offline
Senior Member
 
Join Date: Feb 2008
Location: Western Australia, Home is Devon
Posts: 354
Default

Part No. CCT113. Its from a capri so that should help your search! Good luck!
Reply With Quote
  #4  
Old 2nd February 2011, 06:44 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

is it heavy at the pedal with this pressure plate?
i will be using a 1800 silvertop on a type9 and will be getting to this bit at some point
Reply With Quote
  #5  
Old 2nd February 2011, 07:42 PM
jasongray5's Avatar
jasongray5 jasongray5 is offline
Senior Member
 
Join Date: Feb 2008
Location: Western Australia, Home is Devon
Posts: 354
Default

I dont find it too bad? Although if you did, then you could always move the cable down the pedal? if you see what I mean?
Reply With Quote
  #6  
Old 2nd February 2011, 10:20 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default

On a 1.8 flywheel, you need Mondeo 1.8 clutch (220 mm disk, 26mm shaft, 23 splines). As for the clutch release bearing, some people make do with a Sierra bearing (Quinton Hazell CCT132), also I've heard some put on two of those, some get the longer CCT133 bearing. Here's a list of part numbers of equivalents in other catalogs: http://www.haynes.co.uk/forums/showt...?t=4036&page=3
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote
  #7  
Old 2nd February 2011, 11:00 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

i think you guys are missing something here. he is missing the actual clutch arm not just the release bearing.

the release arm should be with the box you wont get a new one with the clutch and replacements are like rocking horse poo. i would contact the person that sold you the box and ask if they still have it.
__________________
My Roadster Is Finished NerNer.......
Pigs can fly, you just have to carry them onto the plane.

My Pictures
http://s707.photobucket.com/user/ashgardiner/profile/
Reply With Quote
  #8  
Old 3rd February 2011, 01:22 AM
jasongray5's Avatar
jasongray5 jasongray5 is offline
Senior Member
 
Join Date: Feb 2008
Location: Western Australia, Home is Devon
Posts: 354
Default

True story Ash! They come up occasionally on ebay, maybe keep your eyes peeled, or as Ash says, email the gearbox supplier?
Reply With Quote
  #9  
Old 3rd February 2011, 11:56 AM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

Usually a few on ebay or Burton power used to do them brand new,links below.


http://cgi.ebay.co.uk/Ford-Pinto-Ral...item41565beed5

http://www.burtonpower.com/
Reply With Quote
  #10  
Old 4th February 2011, 01:18 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

what starter is everyone useing i got a fiesta zetec 1.8 one and a sierra 1.8 cvh one but the pinion clutch is dead so it will be cash for a recon if the fiesta one is no good
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:04 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.