progress update

[JakeH]

i see, well the roads round here are awful at best but im not using it for road, going to be track use only this time. will build something else for road use at some point

i think 25mm clearance should do it, going to make my own bodywork anyways, always wanted to do some fibreglass work so this is the perfect opportunity!

Cheers bonzo

Jake

[JakeH]

again not much been going on but there is some news

the sierra is now stripped right down to a bare shell which should be going to scrap next weekend

also done a little work on the chassis but nothing noticeable on pictures, finishing welds and the sort. had a little moment earlier where i decided to put the engine and gearbox on the table and the chassis around it which turned out to be a silly idea without and engine crane.

should be ordering the diff mounts and getting a new bell housing for the type 9 to zetec modification in the next week. needing the diff mounts to align the engine and get the mounts made.

a couple of piccies for your entertainment one of the sierra engine removal in progress (complete with front axle) and one of my silly idea