Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 20th September 2011, 04:39 PM
Peter-C Peter-C is offline
Senior Member
 
Join Date: Jul 2008
Posts: 281
Question Battery terminal covers

Do you have to have the terminals covered for IVA as I've read the manual and can't find any evidence

Confused

Peter
Reply With Quote
  #2  
Old 20th September 2011, 04:52 PM
mark mark is offline
Senior Member
 
Join Date: Mar 2009
Location: Billingham (north east)
Posts: 770
Default

I covered mine with some from cbs and remember mr iva having a good nosey at them!

I covered mine as i assumed that they surely have to be covered to pass, never actually looked it up as i would cover them both regardless anyway

You would imagine at an absolute minimum that the positive be covered
Reply With Quote
  #3  
Old 20th September 2011, 05:38 PM
big_wasa's Avatar
big_wasa big_wasa is offline
Senior Member
 
Join Date: Mar 2007
Location: Spalding, Lincs
Posts: 129
Default

Yes you need one on the live and with VERY good reason. I wish I had fitted mine sooner than I did.

I posted this on Lcb earlier in the year.

"Having had a little acident I am in the market for a new watch.

I brushed past the battery with multimeter in my hand to measure a voltage. I wasnt really working on the car, just poped out to check somthing.

It arked and welded my watch to the battery tray and wouldnt let go.

The stainless strap glowed orange untill the pins in the strap melted and I was able to get it of. It dumped its full charge through my watch.

After getting back from A&E I have full thickness burns the size of a golf ball. And lesser burns to the size of a tennis ball on my inner wrist

I am told I will have at least a month to save up for a new watch before I can ware one again.

And no I hadnt got around to puting a rubber cap over the live terminal. "
__________________
Nowt again.
Reply With Quote
  #4  
Old 20th September 2011, 06:26 PM
Peter-C Peter-C is offline
Senior Member
 
Join Date: Jul 2008
Posts: 281
Default

Ouch, I must admit that I rest spanners and objects on the battery occasionally, so covers it is.

Peter
Reply With Quote
  #5  
Old 20th September 2011, 07:29 PM
Spikehaus Spikehaus is offline
Senior Member
 
Join Date: Aug 2008
Location: Plymouth, Devon
Posts: 484
Default

I purchased some lovely stainless braided fuel injection hoses for my car, while messing about and working on the car, I knocked one of them agaist the battery live (while full of pressurised fuel). It tooks a few seconds to workout why the fuel line was going black in one spot and getting very hot. I changed my pants, removed the battery, waited half hour to check for fire and then went home to purchase a £3 cover from ebay!
Reply With Quote
  #6  
Old 20th September 2011, 07:56 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

All lessons learned the hard way,speedy recovery Wasa ,and for anbody else reading this there is a big possiblity it may explode spectacularly showering anyone near with acid and I have seen it happen with a large truck battery with a guy leaning over it,luck not to be blinded.

Piece of black rubber floor mat over it,quick ,cheap and easy.


Another one learned early in the career was place the positive on first and the earth last,earth cant short to earth.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.

Last edited by flyerncle : 20th September 2011 at 07:58 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 04:05 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.