#1
|
|||
|
|||
handyandy or talon or ????????
hiya
who offers the pre cut kits? and whats the Benefits of each. I heard handy andy built the awkward front panel to save making a jig. do the flat packs come with the metal plates? brackets? can these be bought as I extrss tried to contact handy andy but inbox is full. if u build such a kit then pm me a price if you dont want it public. pre cut kit to take an mt75 gearbox but price on botj (type 9) please. anyone bought a flat pack and had first hand experience? thanks nick |
#2
|
||||
|
||||
Handy has been of the radar for quite a while after his mum passes away.
Phil will do you a kit though, TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
||||
|
||||
Handyandy not been active on here for over a year and was selling his car but dont know if he ever sold it so as far as I know you only its only talon thats doing them now an sure he will be along soon to give you all the prices and what not but if memory serves I think they start at £225 plus plate kit
I dont know if he supplies front frame fully welded but as long as you get the jig right these are not too hard to make yourself Hope this helps Good luck with your build |
#4
|
||||
|
||||
Beat me to it
|
#5
|
|||
|
|||
Phil made me a front frame, not sure if its part of his flat pack though.
The material he uses is good too, nice and square not the sloped shoulder stuff that makes measuring that bit harder |
#6
|
||||
|
||||
Tube only flat packs which include all the 25x25 and 20x20 in 1.5mm walled ERW is all pre cut on a cold saw and profiled on a milling machine this is £225
Postage for the flat pack is £40 via TNT please bare in mind it weighs 50kg plus. I can weld the front frame together it's not a problem although it will be another £5 as it has to be sent in separate package. Complete CNC cut chassis plate kits can be brought from Gillham online. |
#7
|
|||
|
|||
I thought gillham online did it all including a flat pack
Arfon |
#8
|
|||
|
|||
I will check with them as well. thanks.
phil whats the time frame for a pre cut kit? no rush just wondered and where are you based? |
#9
|
||||
|
||||
I've got two other flat packs to do so if I set the saw and mill up for it a cut it makes sense to run half a dozen off at the same time, lead time on a flat pack is currently 10 days to 6 months.
|
#10
|
|||
|
|||
dont start cutting till you have asked me. so if you get to 5 and need another I will make number 6 just raid kids piggy banks whats the deposit to get on the list?
I am guessing reading other posts you will need at least the money to buy materials to cover your costs. pm me if its better. |
Thread Tools | |
Display Modes | |
|
|