|
|
|||||||
| View Poll Results: Which method would you use to cut your chassis steel? | |||
| I Wouldn't, I would buy a chassis pack |
  
|
12 | 23.08% |
| Hacksaw |
  
|
7 | 13.46% |
| Chopsaw |
  
|
18 | 34.62% |
| Bandsaw |
  
|
8 | 15.38% |
| Other |
  
|
7 | 13.46% |
| Voters: 52. You may not vote on this poll | |||
|
|
Thread Tools | Display Modes |
|
#6
7th July 2009, 06:30 PM
|
||||
|
||||
Bandsaw
I used my trusty old bandsaw to cut all of my steel. Place the metal in it, then walk away & leave it to cut. well handy for some of the thicker stuff that I often cut
 Chopsaws do the job but to be honest, I hate the sparks & all the fettling involved.  A mitre saw such as the Rage3 is a much better tool but as with the chopsaw It still needs personal effort to make the cut. As and when my bandsaw bites the dust, i'll certainly replace it PDQ 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie  www.roadster-builders.co.uk Last edited by Bonzo : 7th July 2009 at 06:31 PM. Reason: Spelling again 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode