#31
|
||||
|
||||
The problem with stainless is that it has a work hardened surface that you need to get under, if you let the drill run slow, this will work harden the material and the drill will burn out. What you need to do is have a sharp drill and don't be affraid to push it. Oh and use plenty of coolant
Kind regards John
__________________
Quality parts for the Haynes Roadster - manufactured to a standard, not down to a price. Contact us at component-sales@hotmail.co.uk or visit our website www.3gecomponents.com
|
Thread Tools | |
Display Modes | |
|
|