pedal bushes, tube or not?

[spud69]

Originally Posted by Rik178m

just making my pedal bushes. Should i make them the same way as the suspension, in 2halfs with a lip and stainless steel inner or just a solid cylinder with 8mm hole?

IF you buy some ptfe rod (only cheap) slightly larger od than your bush tube, you can hammer them into your bush tube then drill through to fit a smaller diameter crush tube. Works a treat and you get a nice smooth pedal travel.

Something like this:

http://www.directplasticsonline.co.uk/PTFERod/25mm/

Regards.....Andrew