Saturn Price Squeeze and developments

[spud69]

Dear All,

Saturn have now been trading for 3 months and now have a known cost base to work from and as such can revise the prices for in house products, bought in products will remain as they are. As such the website and stores have been adjusted to reflect this.

Amended price summary as follows:

GRP Products

Full 10 piece Gel Coated GRP Haynes body kit c/w Aeroscreen and Bulkhead - £885 to £770
Full 6 piece Gel Coated GRP Haynes body kit c/w Aeroscreen - £465 to £410
GRP Nose Cone - £140 to £125
GRP Bonnet - £125 to £110
GRP Scuttle - £125 to £115
GRP Front Cycle Wings - £65 to £55
GRP Rear Wings - £140 to £120
GRP Side Panels - £185 to £165
GRP Rear Tub - £130 to £120
GRP Black Aeroscreen - £60 to £45
GRP Black Bulkhead - £80 to £65
GRP Black Dashboard - £60 to £50

Fabricated Parts

Pre Cut Chassis pack with ALL parts pre cut and labelled, including paper build table template for bottom rail fabrication, ALSO front frame jigged and welded - £250 to £230
Completed chassis including all cp's and brackets - £670 to £650 (£790 inc p/coating)
Front lower wishbones - £85 to £75
Front upper wishbones - £64 to £57
Rear lower wishbones - £89 to £75
Rear upper wishbones - £86 to £75
Uprights - £115 to 105
Full wishbone and upright set - £395 to £365 (£45 p/coated)

We will also be adding to the product range as time goes on, firstly to include fuel tanks and roll bars. Shortly we will have full turning facilities for one offs and a cnc plasma cutting service for any one offs, dxf file will be required.

We have also added to the Saturn Roadster section where we are now offering full kits to builders to complete a roadster plus a donor car, this is not a complete full kit but will be soon. It is also an option for the kit to be purchased in 3 stages, complete chassis - rolling chassis - body and panels.

The intention is to carry out the same for the single seater ready for the launch of the build manual.

All prices include VAT

Both myself and Handy hope this helps all builders out there and promotes the Haynes Roadster as a viable concept to all, especially in these tight times (we all need some fun)

Please feel free to visit the Saturn Site (link below) and have a browse.

Regards........AndyH (tall) + HAndy (small)