2.0 Zetec toType 9

[Bonzo]

The action of my clutch is just fine now I have the correct bearing.

1.8 Zetec flywheel & Mk1 Mondeo 1.6/1.8 clutch.

When I first tried it with the relase bearing that was sold to me as a CCT133, the clutch arm was almost touching the bell housing before it released the clutch ( Way too close for comfort )

As it turned out the release bearing sold to me, was in fact the standard CCT132

I now have the correct bearing & all is good

So, same clutch & flywheel combo as Coozer has works for me