|
|
#3
31st May 2010, 09:58 AM
|
||||
|
||||
having given it a little more thought ....
the angles of the front frame are thus... 1) a compound mitre of 26/14 degree at each base of FF2 / FF3 2) a 26degree "notch"(13 degree either side of scribe line) 290mm from tip of base. 3) a 14 degree single cut at the top(69.5mm above the scribe line of the "notch") hope this helps cheers andy 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode